Developing a Smok Pen
Developing a Smok Pen
The Smok Pen is really a revolutionary vaporizing pen which allows for a write-to-write experience, even while you are away from home. This is due to the unique design of the pen. It has two tanks, one smaller than the other, that house the e juice and charged batteries. When the user wants to write, he just places the pen into the smaller tank and places the ink in the chamber where it’ll be vaporized. He simply turns on the pen and writes as if he could be writing under a black mirror.
One of the biggest attributes of the Smok Pen is its ability to charge while it is on your own desk. This is because the coils on the Smok Pen are designed in a way to help keep the e juice from dripping onto the table or anywhere else. This is because of the 0.3-ohm coil that’s placed inside the Smok Pen. The 0.3-ohm coil means that even the slightest of air currents will not affect the writing process. Simply because the electronic circuitry has protection built in so that it will not be suffering from extremely low voltage electric currents.
The Smok Pen could be charged internally with a charger or via the USB connection that is included with it. Because the electronic circuitry has a safety barrier built in, this means that there is absolutely no risk involved when charging these devices through the computer. The Smok Pen has a charging capacity of sixteen 50 mah batteries, which is great for all pens that use one or two batteries.
In order to keep the Smok Pen doing Juul Compatible Pods work for an extended time period it is important you don’t overcharge the battery. Overcharging the battery will reduce the voltage that’s available and may eventually bring about these devices malfunctioning. Overcharging the Smok Pen could also affect the vaporizing process. If you feel that your battery isn’t getting the vapor it should, remove the pen from the energy source and let it cool off for a couple minutes.
The fire button on the Smok Pen is situated at the bottom right corner of the device. The fire button comes with an orange light, which indicates that it’s on. You can press this button to activate the electronic heating element that may permit you to vaporize the oil. Once you have done so you can remove the coil from the holder and place it into the holder and place the Smok Pen into the airflow chamber, which will cause the heating element to start out heating up and burning away the wick.
When the coil is taken off the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are put inside the holder and they get heated from the airflow. After they get hot they start to turn blue, that is the indication that it is ready for the pen’s battery. Make sure that you place your sub-ohm in to the chamber before you push the fire button. If you do not put the coil in to the airflow chamber then your oil will leak and cause the leaking of e-juice.
Before you put the battery in to the pen, you must make sure that you have disconnected all the leads. Then you have to take out the Smok Pen’s cap and locate the leak or drip tip. You must clean this with a little cotton bud, so as to get rid of the leak. Then reattach the cap back again to the Smok Pen and you also are ready to place the battery into the pen.
The ultimate the main construction process is the adapter plate, which fits into the Smok Vaporizer’s USB port. This plate lets you charge your e-juice through your computer, so long as you have an adapter for USB connection. I really like this part since it allows me to charge my entire kit simultaneously without fretting about running out of power or constantly running out of e-juice.